Allied Wooden Embroidery Hoops - Flat Table

Special features of Allied Wooden hoops which make them truly superior to competitor's alternate material hoops:
• Naturally grained surface texture provides a notably superior grip when hooping a wide range of fabrics, whether slippery, thin or thick
• Double Height (DH) wooden hoops are extra tall providing two specific advantages ove... .
Read More

Special features of Allied Wooden hoops which make them truly superior to competitor's alternate material hoops:
• Naturally grained surface texture provides a notably superior grip when hooping a wide range of fabrics, whether slippery, thin or thick
• Double Height (DH) wooden hoops are extra tall providing two specific advantages over single height plastic hoops
a) The extra hoop height provides much needed additional fabric gripping power for tighter hooping of thicker garments
b) The extra height prevents unintended, costly inner hoop pop-out commonly experienced while using single height plastic hoops with thicker garments
• The long 67 mm (2 5/8 inch) bolt-style adjustment screw is much easier to use and provides added hoop opening for thicker garments
• An added center spring in the hoop adjustment screw assembly helps the outer hoop remain spread-open which greatly facilitates the hooping process
• Real-world use by actual embroiderers show that Allied wooden hoops help considerably in minimizing "hoop burn"

Allied wooden hoops are available in a variety of small to large sizes. When compared side-by-side against alternate material hoops, Allied wooden hoops provide superior performance and value, every time!

For more product feature information, click the ALLIED HOOP FEATURES link above

Read Less

Allied hoops come in many versions: AGL/AGLC, PAGL, AWH, etc. Please review all hoops & parts for best selection before placing your order.

123 mm (Appr. 4.8 inch) Short Bar Type Mounting

Ultramatic Short Bar Type Mounting is required for these hoops to fit on Ultramatic Flat Table embroidery machine. Bar width: Appr. 4.8 inch (12...

242 mm (Appr. 9.5 inch) Long Bar Type Mounting

Ultramatic Long Bar Type Mounting is required for these hoops to fit on Ultramatic Flat Table embroidery machines. Bar width: Appr. 9.5 inch (24...

236 mm (Appr. 9.3 inch) Short Screw Type Mounting

Ultramatic Short Screw Type - Mounting Distance of appr. 9.3 inch (236 mm) is required for these hoops to fit on Ultramatic Flat Table embroider...

464 mm (Appr. 18.25 inch) Long Screw Type Mounting

Ultramatic Long Screw Type - Mounting Distance of appr. 18.3 inch (464 mm) is required for these hoops to fit on Ultramatic Flat Table embroider...

Replacement Hoop Screws and Parts

Always use Allied Replacement Adj. Screws and parts. Keep original Allied spares on hand to avoid production delays!

Subscribe to our Newsletter
for product highlights and special offers